581 1118
DVR-C320S
kr.42,900
Advanced Dash Cam with Driver Assistance (ADAS)
A dash cam is an on-board camera that continuously records the view through the vehicle’s front windshield. The recorded footage can be used as digital evidence in the event of a road accident, break-in or vandalism. When parked, dash cams can capture video and picture evidence if vandalism is detected.
The DVR-C320S records in 1080p Full-HD for excellent picture quality and includes driver assistance functions, such as lane departure warnings, rear proximity alert and others, as well as GPS and WiFi capabilities. You can connect the camera to compatible Alpine head units to display recorded footage and even a live-view on the touch screen. There is also an optional rear accessory camera available. You can use the convenient companion app to make adjustments and view recordings on the go.
Download the Alpine Dash Cam Viewer for PC or MAC from the support section below to view your recordings on your computer at home.
Camera
- 2 Megapixel, ON Semiconductor CMOS
- Resolution: Full HD (1920 x 1080P @ 29fps / H.264 / MP4
Angle of view (Lens)
- Large angle: 144°
- Horizontal: 112°
- Vertical: 59°
Capacity
- Micro SD Card 32GB included
Recording Modes
- Continuous Recording
- Incident Recording
- Manual Recording
- Parking Recording (parking mode)
- Audio Recording
Driver Warnings and Alerts
- Lane Departure Warning System
- Rear Proximity Alert
- Forward Collision Warning System
- Front Vehicle Departure Alert
- Speed Camera / Red-light Camera Warning
General
- Alpine Multimedia Receiver Control for compatible Alpine head units
- 3-Axis Accelerometer G-Sensor (3D, ±3G)
- External GPS
- Built-in Wi-Fi
- Built-in Speaker
- Input Power: DC 12
- Connection Interface: 1 x V-IN port
MULTI CAMERA INTERFACE
• Connects up to 3 cameras
• Works with Alpine Direct Cameras
• Touch control of all camera views from the touch screen
• Compatible with X802D-U, INE-W710D, iLX-702D, X902D-DU and many more
• Includes Interface Box and Cable Harness
High Dynamic Range (HDR) Side View Camera with RCA and Direct Camera Connection
The HCE-CS1100 is a High Dynamic Range Side View camera for Alpine devices with direct camera input or RCA connection. It includes a universal mirror mount and a long connection cable.
Thanks to HDR technology, the picture quality is much better compared to regular camera systems – for easier manoeuvring and greater safety.
A side-view camera is a great addition to the more traditional front and rear camera systems. It can prevent scratched rimes during parking or for example be used as surveillance of the side of your motor-home.
SPECIFICATIONS
Dimensions
- Camera: 23.6 x 23.6 x 26.5mm (excluding projection on the rear)
- Power Section: 38.0 x 25.0 x 15.0mm (excluding projection)
- Camera Cable Length: 0.75m
- Camera Extension Cable Length: 3.5m
- Power Unit (Reverse/ACC/Video/GND): 3m
General
- Power Requirement: DC 9V to DC 15.6V
- Power Consumption: 1.2W (12V)
- Operating Temperature (Power Section): -30°C – +70°C
- Weight Camera: 33g (camera only)
- Weight Power Section: 83g (including cord)
Camera
- Ground Type: Negative Ground Type
- Output Image: Composite Video NTSC
- Image Output Impedance: 75 Ohms (1Vp-p)
- Image Sensor: 1/3.7 inch CMOS image sensor, Aspect Ratio 4:3
- Effective Number of Pixels: 640 (H) x 480 (V), Approximately 300,000 pixels
- Lens Focal Length: f=2.8mm
- Lens Brightness: F=1:2.0
- Angle of Field: Horizontal = 82.7° , Vertical = 60.5°
- S/N Ratio: 40.5 dB or more
- Resolution (Horizontal. Center Area): 330 TV Lines
- Operating Temperature: -30°C – +70°C
- Illumination Range: Approximatly 1.5Lx to 100kLx
Dual Multi-Camera Interface allows connection of one or two direct connection cameras to a screen with RCA Input
Enables connection of one or two Multi-View cameras to screens with RCA input. Includes switch for camera image display on or off. Using the MODE button you can switch between viewing modes. Cameras turn on automatically when reversing.
Specifications
General
- Output Image: Normal image, CVBS (NTSC Video signal) 16:9 Image output for wide-screen
- Image Output impedance: 75 Ohm (1Vp-p)
- Power Requirement: 12 V.DC
- Negative Ground
- Power Consumption: Less than 1.7W (12V)
- Operating Temperature: -30°C – +80°C
- Weight Power Section: 109g (including cable)
- Weight Switch Section: 50g (including cable)
Dimensions:
- Power Unit: 100 x 50 x 25mm
- Switch Section: 29 x 38.5 x 13.6 mm
- Power Unit Cable: 2m / 6m
- RCA Extension Cable: 2m
- Switch Cable: 3m
2x Alpine Heyrnatól með mótakara
SHS-N252
2 stk heyrnatól
Mótakari fylgir
2 AUX inngangar
Hægt að velja um rás 1/2
• 9” (23cm) adjustable Touch Screen
• 1DIN chassis
• Works with Apple CarPlay
• Works with Android Auto
• FLAC Playback (24/96 and 24/192 Compatible)
• 4x50W HighPowerAmp
• Built-in DAB+ Tuner
• Alpine TuneIt App Ready
• WMA/MP3/AAC Playback
• MP4 Playback (USB)
• BASS ENGINE SQ
• 3 PreOuts (4V)
• 9-band Parametric EQ
• 6-Channel Digital Time Correction
• Crossover
• GPS / Glonass antenna Included
• HDMI Input
• USB Video Playback
• Built-in Bluetooth® Module
• Bluetooth® Audio Streaming
• Camera Input (RCA)
• Steering Wheel Remote Control Ready
• Vehicle Data-bus Interface Ready
• 1x Rear A/V Input
• Anti-theft Security Code
High Dynamic Range (HDR) Rear View Camera with Direct Camera Connection
Thanks to HDR technology, the picture quality is much better compared to regular camera systems – for easier maneuvering and greater safety.
A rear view camera is a great way to improve your parking skills and make reversing safer. The camera image automatically comes on when you shift into reverse.
The cameras are very small, so they’re easy to install and don’t change the appearance of the car.
Works with Alpine products featuring Direct Camera Input.
SPECIFICATIONS
Dimensions
- Camera: 23.6x 23.6x 24.0mm (excluding projection on the rear)
- Camera Cable Length: 0.5m
- Camera Extension Cable Length: 10.5m
General
- Power Requirement: 6.0 V.DC
- Negative Ground
- Max. Power Consumption: 0.5W
- Weight Camera: 27g (including cable)
Camera
- Output Image: Mirror Image, Composite Video (NTSC Color Signal System)
- Image Output: 1 Vp-p (75 Ohms)
- Image Sensor: 1/3.7 inch CMOS Image Sensor, Aspect Ratio 4:3
- Effective Number of Pixels: 640 (H) x 480 (V), Approximately 0.3 Mega pixels
- Lens Focal Length: f=1.34mm
- Lens Brightness: F=1:2.0
- Angle of Field: Horizontal = 131°, Vertical = 103°
- S/N Ratio: 40.5 dB or more
- Resolution (Horizontal. Center Area): 330 TV Lines
- Operating Temperature: -30°C – +70°C
- Illumination Range: Approximately 1.5 to 100klx
The KTA-200M is a very compact mono amplifier, that is mainly designed to be power-stacked with the iLX-W650BT, but can also be used stand-alone in any universal configuration.
Featuring Alpine’s Dynamic Peak Power (DPP) technology, the KTA-200M can produce 400 Watts of Alpine’s Exclusive Dynamic Peak Power for big subwoofer power in a small space.
The iLX-705D is the successor of the highly popular, award winning iLX-702D Digital Media Station. This new generation includes many improvements, such as much higher screen resolution, wireless Apple CarPlay, 2 USB ports, as well as a built-in Class-D amplifier and Hi-Res Audio capabilities.
If you look for a high-performance 2DIN system for your car that includes all the latest features, cutting-edge media compatibilities and killer sound quality, the iLX-705D is for you.
Enjoy wireless Apple CarPlay and Android Auto (wired) compatibility, DAB+ digital radio, USB video playback, Hi-Res Audio playback, Bluetooth hands-free and audio streaming and much more with this amazing Head Unit.
Bring exceptionally good sound quality into your vehicle: the Alpine iLX-705D is among the world’s first Head Units featuring a built-in Class-D amplifier and has a wide array of professional sound tuning functions, such as digital X-overs, a Parametric EQ, digital time correction and much more.
The iLX-F905D Alpine Halo9 is the second generation of Alpine’s world-famous Halo product line, featuring a 9-inch high-resolution WXGA touch-screen and is compatible with virtually any vehicle with 1DIN or 2DIN installation dock. The super-slim display appears to simply hover over your dashboard and can be adjusted in various ways for the best position.
Enjoy wireless Apple CarPlay and Android Auto (wired) compatibility, DAB+ digital radio, USB video playback, Hi-Res Audio playback, Bluetooth hands-free and audio streaming and much more with this amazing Head Unit.
Bring exceptionally good sound quality into your vehicle: the Alpine Halo9 is the world’s first Head Unit featuring a built-in Class-D amplifier and has a wide array of professional sound tuning functions, such as 2-way X-overs, a Parametric EQ, digital time correction and much more.
SINGLE SOURCE MOBILE WIRELESS HEADPHONE
Single channel IR headphone
Fold-Flat technology allowing easy storage of the headphones when they are not in use. For example, they can easily fit into the side door. Fully transparent infra-red headphones for much wider reception, meaning you don’t lose signal, when you move your head.
• Viewing Angle: Rear = Horizontal 131°, Vertical 103°
• Viewing Mode: 1 = Rear View
• Works with products featuring Direct Camera Input
• Automatic Imaging Function: Exposure and white balance adjustment
• Mirror Image (NTSC)
• Camera Dimensions: W23,6mm x H23,6mm x D24,0mm
• Non-blackbox Design
• Includes 10,5 meter Cable
The KTA-450 is a very compact 4/2-Channel amplifier, that is mainly designed to be power-stacked with the iLX-W650BT, but can also be used stand-alone in any universal configuration.
Featuring Alpine’s Dynamic Peak Power (DPP) technology, the KTA-450 can add bursts of 100 Watts RMS power when needed.
In combination with the iLX-W650BT, the KTA-450 won the 2019 Innovations Award at CES Show 2019. If you plan to buy an iLX-W650BT, this tiny amplifier will make a significant improvement to your system.