DVR-C320S
kr.42,900
Advanced Dash Cam with Driver Assistance (ADAS)
A dash cam is an on-board camera that continuously records the view through the vehicle’s front windshield. The recorded footage can be used as digital evidence in the event of a road accident, break-in or vandalism. When parked, dash cams can capture video and picture evidence if vandalism is detected.
The DVR-C320S records in 1080p Full-HD for excellent picture quality and includes driver assistance functions, such as lane departure warnings, rear proximity alert and others, as well as GPS and WiFi capabilities. You can connect the camera to compatible Alpine head units to display recorded footage and even a live-view on the touch screen. There is also an optional rear accessory camera available. You can use the convenient companion app to make adjustments and view recordings on the go.
Download the Alpine Dash Cam Viewer for PC or MAC from the support section below to view your recordings on your computer at home.
Camera
- 2 Megapixel, ON Semiconductor CMOS
- Resolution: Full HD (1920 x 1080P @ 29fps / H.264 / MP4
Angle of view (Lens)
- Large angle: 144°
- Horizontal: 112°
- Vertical: 59°
Capacity
- Micro SD Card 32GB included
Recording Modes
- Continuous Recording
- Incident Recording
- Manual Recording
- Parking Recording (parking mode)
- Audio Recording
Driver Warnings and Alerts
- Lane Departure Warning System
- Rear Proximity Alert
- Forward Collision Warning System
- Front Vehicle Departure Alert
- Speed Camera / Red-light Camera Warning
General
- Alpine Multimedia Receiver Control for compatible Alpine head units
- 3-Axis Accelerometer G-Sensor (3D, ±3G)
- External GPS
- Built-in Wi-Fi
- Built-in Speaker
- Input Power: DC 12
- Connection Interface: 1 x V-IN port
SINGLE SOURCE MOBILE WIRELESS HEADPHONE
Single channel IR headphone
Fold-Flat technology allowing easy storage of the headphones when they are not in use. For example, they can easily fit into the side door. Fully transparent infra-red headphones for much wider reception, meaning you don’t lose signal, when you move your head.
Dual Multi-Camera Interface allows connection of one or two direct connection cameras to a screen with RCA Input
Enables connection of one or two Multi-View cameras to screens with RCA input. Includes switch for camera image display on or off. Using the MODE button you can switch between viewing modes. Cameras turn on automatically when reversing.
Specifications
General
- Output Image: Normal image, CVBS (NTSC Video signal) 16:9 Image output for wide-screen
- Image Output impedance: 75 Ohm (1Vp-p)
- Power Requirement: 12 V.DC
- Negative Ground
- Power Consumption: Less than 1.7W (12V)
- Operating Temperature: -30°C – +80°C
- Weight Power Section: 109g (including cable)
- Weight Switch Section: 50g (including cable)
Dimensions:
- Power Unit: 100 x 50 x 25mm
- Switch Section: 29 x 38.5 x 13.6 mm
- Power Unit Cable: 2m / 6m
- RCA Extension Cable: 2m
- Switch Cable: 3m
MULTI CAMERA INTERFACE
• Connects up to 3 cameras
• Works with Alpine Direct Cameras
• Touch control of all camera views from the touch screen
• Compatible with X802D-U, INE-W710D, iLX-702D, X902D-DU and many more
• Includes Interface Box and Cable Harness
• Viewing Angle: Rear = Horizontal 131°, Vertical 103°
• Viewing Mode: 1 = Rear View
• Works with products featuring Direct Camera Input
• Automatic Imaging Function: Exposure and white balance adjustment
• Mirror Image (NTSC)
• Camera Dimensions: W23,6mm x H23,6mm x D24,0mm
• Non-blackbox Design
• Includes 10,5 meter Cable
The KTA-200M is a very compact mono amplifier, that is mainly designed to be power-stacked with the iLX-W650BT, but can also be used stand-alone in any universal configuration.
Featuring Alpine’s Dynamic Peak Power (DPP) technology, the KTA-200M can produce 400 Watts of Alpine’s Exclusive Dynamic Peak Power for big subwoofer power in a small space.
Rear View Camera (RCA)
• Distance guides
• High-res camera
• Ultra-wide angle camera
The iLX-705D is the successor of the highly popular, award winning iLX-702D Digital Media Station. This new generation includes many improvements, such as much higher screen resolution, wireless Apple CarPlay, 2 USB ports, as well as a built-in Class-D amplifier and Hi-Res Audio capabilities.
If you look for a high-performance 2DIN system for your car that includes all the latest features, cutting-edge media compatibilities and killer sound quality, the iLX-705D is for you.
Enjoy wireless Apple CarPlay and Android Auto (wired) compatibility, DAB+ digital radio, USB video playback, Hi-Res Audio playback, Bluetooth hands-free and audio streaming and much more with this amazing Head Unit.
Bring exceptionally good sound quality into your vehicle: the Alpine iLX-705D is among the world’s first Head Units featuring a built-in Class-D amplifier and has a wide array of professional sound tuning functions, such as digital X-overs, a Parametric EQ, digital time correction and much more.
10,2″ WVGA Overhead Monitor with DVD-Player
With its own DVD player built in, this ultra-high resolution 10.2” Overhead Monitor gives you car theatre at its best. Alpine also offers the Perfect Fit installation solution including all parts and instructions for a professional and secure mounting of the overhead monitor.
• 9” (23cm) adjustable Touch Screen
• 1DIN chassis
• Works with Apple CarPlay
• Works with Android Auto
• FLAC Playback (24/96 and 24/192 Compatible)
• 4x50W HighPowerAmp
• Built-in DAB+ Tuner
• Alpine TuneIt App Ready
• WMA/MP3/AAC Playback
• MP4 Playback (USB)
• BASS ENGINE SQ
• 3 PreOuts (4V)
• 9-band Parametric EQ
• 6-Channel Digital Time Correction
• Crossover
• GPS / Glonass antenna Included
• HDMI Input
• USB Video Playback
• Built-in Bluetooth® Module
• Bluetooth® Audio Streaming
• Camera Input (RCA)
• Steering Wheel Remote Control Ready
• Vehicle Data-bus Interface Ready
• 1x Rear A/V Input
• Anti-theft Security Code
High Dynamic Range (HDR) Side View Camera with RCA and Direct Camera Connection
The HCE-CS1100 is a High Dynamic Range Side View camera for Alpine devices with direct camera input or RCA connection. It includes a universal mirror mount and a long connection cable.
Thanks to HDR technology, the picture quality is much better compared to regular camera systems – for easier manoeuvring and greater safety.
A side-view camera is a great addition to the more traditional front and rear camera systems. It can prevent scratched rimes during parking or for example be used as surveillance of the side of your motor-home.
SPECIFICATIONS
Dimensions
- Camera: 23.6 x 23.6 x 26.5mm (excluding projection on the rear)
- Power Section: 38.0 x 25.0 x 15.0mm (excluding projection)
- Camera Cable Length: 0.75m
- Camera Extension Cable Length: 3.5m
- Power Unit (Reverse/ACC/Video/GND): 3m
General
- Power Requirement: DC 9V to DC 15.6V
- Power Consumption: 1.2W (12V)
- Operating Temperature (Power Section): -30°C – +70°C
- Weight Camera: 33g (camera only)
- Weight Power Section: 83g (including cord)
Camera
- Ground Type: Negative Ground Type
- Output Image: Composite Video NTSC
- Image Output Impedance: 75 Ohms (1Vp-p)
- Image Sensor: 1/3.7 inch CMOS image sensor, Aspect Ratio 4:3
- Effective Number of Pixels: 640 (H) x 480 (V), Approximately 300,000 pixels
- Lens Focal Length: f=2.8mm
- Lens Brightness: F=1:2.0
- Angle of Field: Horizontal = 82.7° , Vertical = 60.5°
- S/N Ratio: 40.5 dB or more
- Resolution (Horizontal. Center Area): 330 TV Lines
- Operating Temperature: -30°C – +70°C
- Illumination Range: Approximatly 1.5Lx to 100kLx
9-inch DAB+ radio for Fiat Ducato 3 with Apple CarPlay and Android Auto compatibility
Alpine Style DAB+ radio system for the Fiat Ducato 3, Citroën Jumper 2 and Peugeot Boxer 2: get perfect system integration in your Mobile Home, paired with the latest features. The i902D-DU features a huge 9-inch touch-screen that is installed off-set from the dashboard to be perfectly reached from the driver’s seat. This makes it very easy to see and control the unit. The i902D-DU offers extensive media options including Apple CarPlay and Android Auto compatibility. You also get high-end sound quality and sound tuning options with this great system.
Perfect vehicle integration with premium components.
Performance without compromise.
SPECIFICATIONS
Screen
- Screen Size: 9 inch Capacitive WVGA
- LCD Type: Transparent Type TN LCD
- Operation System: TFT Active Matrix
- Number of Picture Elements: 1,152,000 pixels (800 x 3 x 480)
- Illumination System: White LED Backlighting
- Effective Number of Picture Elements: 99.99%
- Colour System: NTSC, PAL
Max Power Output Ratings
- Max Power Output: 4 x 50 W
FM Tuner
- Tuning Range: 87.5 – 108.0 MHz
- Mono Usable Sensitivity: 8.1 dBf (0.7 µV / 75 ohms)
- 50dB Quieting Sensitivity: 12 dBf (1.1 µV / 75 ohms)
- Alternate Channel Selectivity: 80 dB
- Signal-to-Noise Ratio: 65 dB
- Stereo Separation: 35 dB
- Capture Ratio: 2 dB
MW Tuner
- Tuning Range: 531 – 1,602 kHz
- Usable Sensitivity (IEC Standard): 25.1 µV / 28 dBf
LW Tuner
- Tuning Range: 153 – 281 kHz
- Usable Sensitivity (IEC Standard): 31.6 µV / 30 dBf
USB
- USB Requirements: USB 2.0
- Max. Power Consumption: 1,500 mA (CDP Support)
- USB Class: Mass Storage Class, Play From Device
- File System: FAT 16/32
- MP3 Decoding: MPEG-1/2 AUDIO Layer-3
- WMA Decoding: Windows Media™ Audio
- AAC Decoding: ACC-LC format ′′.m4a′′ file
- Flac Decoding
- USB Video playback (AVI/MP4/MKV file with H.264 Video and MP3/AAC Audio)
- Number of Channels: 2-Channel (Stereo)
- Frequency Response: 5 – 20k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate
- Total Harmonic Distortion (at 1kHz): 0.008%
- DynamicRange(at 1kHz): 95 dB
- Signal-to-Noise Ratio: 100 dB
- Channel Separation (at 1kHz): 85 dB
GPS / Glonass
- GPS / Glonass compatible navigation antenna included
BLUETOOTH®
- BLUETOOTH® Version: Bluetooth V3.0+EDR
- Output Power: +4 dBm Max. (Power class 2)
- HFP: HFP (Hands Free Profile)
- OPP (Object Push Profile)
- PBAP (Phone Book Access Profile)
- HSP (Head Set Profile)
- A2DP: A2DP (Advanced Audio Distribution Profile)
- AVRCP: AVRCP (Audio/Video Remote Control Profile)
- SPP (Serial Port Profile)
Sound Tuning
- Subwoofer Level Adjustment: 0 to +15
- Subwoofer Phase Setting: 0° or 180°
- BASS ENGINE SQ: 5Mode, Level 0 to +6
- HighPassFilter: 20 / 25 / 31.5 / 40 / 50 / 63 / 80 / 100 / 125 / 160 / 200 Hz
- HighPassFilter (Slope): Off / -6 / -12 / -18 / -24 dB/oct.
- HighPassFilter (Gain): -12 to 0 dB
- LowPassFilter: 20 / 25 / 31.5 / 40 / 50 / 63 / 80 / 100 / 125 / 160 / 200 Hz
- LowPassFilter (Slope): Off / -6 / -12 / -18 / -24 dB/oct.
- LowPassFilter (Gain): -12 to 0 dB
- Time Correction: 0.0 – 9.9ms (0.1ms step)
- Dual HD EQ Front + Rear
- Parametric Equalizer (Band 1): 20 – 100 Hz
- Parametric Equalizer (Band 2): 63 – 315 Hz
- Parametric Equalizer (Band 3): 125 – 500 Hz
- Parametric Equalizer (Band 4): 250 – 1k Hz
- Parametric Equalizer (Band 5): 500 – 2k Hz
- Parametric Equalizer (Band 6): 1k – 4k Hz
- Parametric Equalizer (Band 7): 2k – 7.2k Hz
- Parametric Equalizer (Band 8): 5.8k – 12k Hz
- Parametric Equalizer (Band 9): 9k – 20k Hz
- Parametric Equalizer (Gain): -14 to +14
- Application Volume Level Setting: -14 to +14
HDMI Section
- Input Format 720p/480p/VGA
- Output Format 480p
General
- Power Requirement: 14.4 V. DC (11-16V allowable)
- Pre Output Voltage (Before Clipping): 2 V / 10k ohms
- Maximum Mounting Angle: 30°
Dimensions
- i902D-DU: Fits for Fiat Ducato III (250), CITROËN Jumper II (250) and Peugeot Boxer II (250)
- Chassis Size (W x H x D) mm: 178 x 50 x 164 mm
Compatible Cars
For cars with a 1 DIN radio or radio preparation.
Cable Harness with ISO / Mini-ISO connector necessary.
9” Touch Screen Navigation for Fiat Ducato III, Citroën Jumper II and Peugeot Boxer II with TomTom maps, compatible with Apple CarPlay and Android Auto
Alpine introduces the 3rd generation motorhome Alpine Style system for the Fiat Ducato III, Citroën Jumper II and Peugeot Boxer II. The X903D-DU features a huge 9-inch touch-screen, that is installed off-set from the dashboard to be perfectly reachable from the driver’s seat. This makes it very easy to see and control navigation maps and other functions.
The 3rd generation includes new rotary encoders for easy volume control and radio station search, as well as a direct camera access button. We also improved the wiring harness to make installation easier and much faster.
The X903D-DU features the iGo Primo NextGen navigation system with TomTom maps pre-installed for 48 countries with 3 years free-of-charge map updates. You can now chose from 3 different motorhome profiles (sizes: S / M / L) or manually input the measurements and weight of your motorhome. This means only suitable routes for your specific motorhome will be proposed. You can also easily install additional camper databases for your camping needs. The X903D-DU also includes Apple CarPlay and Android Auto compatibility.
FEATURES
Tuner
- Memory Presets: FM: 24 / MW: 6 / LW: 6)
- Seek Mode: Local / DX Selection
RDS
- RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT
DAB Tuner
- DAB+ Tuner Built-in
- DAB+/DMB Supported
- DAB+ Slideshow Service
- DAB Service Following
- RDS Fallback (where available)
- Service Preset: 18 Preset Memory
BLUETOOTH
- Built-in BLUETOOTH® Module
- HFP (Hands-Free Profile) Compatible
- Streaming Music: A2DP (Advanced Audio Distribution Profile) Compatible
- Streaming Music Control: AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible
- Advanced BLUETOOTH® Technology
- Connection: SSP (Simple Secure Pairing) Supported
- Menu Language Selection: 24 Languages
- Microphone integrated
Navigation
- Map Coverage: 48 Countries (Western and Eastern Europe)
- Menu Language: 29 Languages
- Voice Guidance Language: 29 Languages for Voice Guidance, 15 Languages for Text-to-Speech (TTS)
- Advanced Address Search
- Post Code Search
- Advanced POI Functions
- 7 Alternative Route Recommendation
- Advanced TMC Mode
- 3D maps with elevation mode
- 3D Motorway Junction View
- Text-to-Speech
- 3 Positioning Sensors: GPS, Gyroscope, Vehicle Speed Pulse
USB Media Connection
- USB Connection
- Music and Video Playback: FLAC/ MP3/ WMA/ AAC/ AVI/ MP4/ MKV
Sound Tuning
- Bass Engine™ Pro
- Subwoofer Level Adjustment
- 4V PreOuts
- Equalizer: 10 selections
- 9-Band Parametric Equalizer
- 6 Channel Digital Time Correction
- Digital Crossover Setting
General
- Power Output: 4 x 50 W High Power Amplifier
- Display: 9′′ Capacitive WVGA High Resolution Display
- My Favourites Function
- 3 PreOuts (4 V, Front / Rear / Subwoofer) KTX-PRE1 Required (Sold separately)
- AUX-In: 1 A/V AUX Input (RCA)
- Steering Wheel Remote Control Function
- Remote Control Ready
- Navigation Guidance Mix
- Camera Connection & Built-in Controls for Multi-View Cameras
- Camera Guide Line Adjustment
- Menu Languages: 24 Languages (for AV / Bluetooth), 29 Languages (Navigation Menu and Voice Guidance)
- Anti-theft security code
- HDMI Input (Alpine Special HDMI connector required)
- Engine Start-Stop unaffected
- Ready for optional DVD Player DVE-5300
Map & Database
- Online Map Update via alpine.naviextras.com
- Featuring TomTom Maps
- 3 Years free of charge map update (multiple updates possible)
Installation
- Includes installation brackets, wiring harness and SWRC interface for complete installation.
SPECIFICATIONS
Screen
- Screen Size: 9 inch Capacitive WVGA
- LCD Type: Transparent Type TN LCD
- Number of Picture Elements: 1,152,000 pixels (800 x 3 x 480)
Max Power Output Ratings
- Max Power Output: 4 x 50 W
FM Tuner
- Tuning Range: 87.5 – 108.0 MHz
- Alternate Channel Selectivity: 80 dB
- Signal-to-Noise Ratio: 65 dB
MW Tuner
- Tuning Range: 531 – 1,602 kHz
LW Tuner
- Tuning Range: 153 – 281 kHz
USB
- USB Requirements: USB 2.0
- Max. Power Consumption: 1,500 mA (CDP Support)
- USB Class: Mass Storage Class, Play From Device
- File System: FAT 16/32
- MP3 Decoding: MPEG-1/2 AUDIO Layer-3
- WMA Decoding: Windows Media™ Audio
- AAC Decoding: ACC-LC format ′′.m4a′′ file
- Flac Decoding
- USB Video playback (AVI/MP4/MKV file with H.264 Video and MP3/AAC Audio)
- Number of Channels: 2-Channel (Stereo)
BLUETOOTH®
- BLUETOOTH® Version: Bluetooth V3.0+EDR
- Output Power: +4 dBm Max. (Power class 2)
- HFP: HFP (Hands Free Profile)
- PBAP (Phone Book Access Profile)
- HSP (Head Set Profile)
- A2DP: A2DP (Advanced Audio Distribution Profile)
HDMI Section
- Input Format 480p/VGA
- Output Format 480p
General
- Power Requirement: 14.4 V. DC (11-16V allowable)
- Pre Output Voltage (Before Clipping): 4 V / 10k ohms
- Maximum Mounting Angle: 30°
Dimensions
- X903D-DU: Fits for Fiat Ducato III (250), CITROËN Jumper II (250) and Peugeot Boxer II (250)
- Chassis Size (W x H x D) mm: 178 x 50 x 164 mm
The Caravan and Camper Software considers following restrictions and limitations by calculating the route and also gives warnings whilst driving without calculated route in 40 countries*:
- General through traffic restrictions for trucks (i.e. environmental zones)
- Through traffic restrictions for all categories of dangerous goods
- (i.e. explosives, flammables)
- Turn and U-Turn restrictions for trucks
- Restrictions for trailers
- Limitations of length
- Limitations of width
- Limitations of height
- Limitations of weight
- Height and width limitations of tunnels and bridge pass throughs
- Maximum allowed weight of bridges
* Andorra, Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gibraltar, Greece, Hungary, Iceland, Ireland, Italy, Kazakhstan, Kosovo, Latvia, Liechtenstein, Lithuania, Luxembourg, Monaco, Netherlands, Norway, Poland, Portugal, Romania, Russia, San Marino, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, United Kingdom
Compatible Cars
For cars with a 1 DIN radio or radio preparation.
Cable Harness with ISO / Mini-ISO connector necessary.