581 1118-
kr.34,900
6″ x 9″ (16cm x 24cm) COAXIAL 2-WAY R-SERIES SPEAKER – Peak Power: 300 Watts – RMS Power: 100 Watts
Meet the 2nd generation of R-Series speakers: packed with many improvements for increased sound quality and bass performance.
If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
- Peak Power: 300 Watts
- RMS Power: 100 Watts
- Frequency Response: 65 Hz – 40 kHz
-
kr.39,900
6″ x 9″ (16cm x 24cm) COMPONENT 2-WAY R-SERIES SPEAKER – Peak Power: 300 Watts – RMS Power: 100 Watts
R-S69C.2Meet the 2nd generation of R-Series speakers: packed with many improvements for increased sound quality and bass performance.
If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
- Peak Power: 300 Watts
- RMS Power: 100 Watts
- Frequency Response: 65 Hz – 40 kHz
-
kr.34,900
4-Channel Power Amplifier – 4 x 80W @ 2 Ohms
Alpine introduces the all-new S-Series amplifiers – a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
The S-Series amplifiers are available in mono, 4-channel and 5-channel configuration.
SPECIFICATIONS
Max Power Output Ratings- Total Max Power: 640W
RMS Power Ratings
- Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 4 x 80W
- Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 4 x 55W
- Bridged into 4 Ohms, 14.4V (≤1%THD+N): 2 x 160W
Sound Tuning
- Crossover: Variable LPF, 50-400Hz (-12dB/oct )
- Crossover: Variable HPF, 50-400Hz (-12dB/oct )
General
- Power Requirements: 14.4 V.DC (9 – 16 V allowable)
- Input Sensitivity (RCA Input): Hi: 0.5 – 10 V Lo: 0.2 – 4.0 V
- High Level Input with automatic power on
- Cable size: Power Cable AWG 8, SPK Cable AWG 10
- Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 10Hz – 30kHz
- THD+N (@ 10W into 4 ohms): <0.03%
- THD+N (@ 50W into 4 ohms): <0.08%
- Damping Factor: >100
- Signal to Noise (@ 50 Watts into 4 Ohms): >98dB
- Weight: 1.9 kg
Dimensions
- Heat Sink (WxHxD) mm: 204 x 58 x 204
-
kr.55,900
5-Channel Power Amplifier – 4 x 60W + 1 x 300W @ 2 Ohms
Alpine introduces the all-new S-Series amplifiers – a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
The S-Series amplifiers are available in mono, 4-channel and 5-channel configuration.
SPECIFICATIONS
Max Power Output Ratings- Total Max Power: 1100W
RMS Power Ratings
- Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 4 x 60W + 1 x 300W
- Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 4 x 40W + 1 x 200W
- Bridged into 4 Ohms, 14.4V (≤1%THD+N): 2 x 120W
Sound Tuning
- Crossover: Variable LPF, 50-400Hz (-12dB/oct )
- Crossover: Variable HPF, 50-400Hz (-12dB/oct )
General
- Power Requirements: 14.4 V.DC (9 – 16 V allowable)
- Input Sensitivity (RCA Input): Hi: 0.5 – 10 V Lo: 0.2 – 4.0 V
- High Level Input with automatic power on
- Cable size: Power Cable AWG 4, SPK Cable AWG 12
- Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 10Hz – 30kHz
- Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-5: 10Hz – 400Hz
- THD+N (@ 10W into 4 ohms): <0.03%
- THD+N (@ 50W into 4 ohms): <0.07%
- Damping Factor: Channel 1/2/3/4: >100, Channel 5: >750
- Signal to Noise (@ 50 Watts into 4 Ohms): >98dB
- Weight: 2.9 kg
Dimensions
- Heat Sink (WxHxD) mm: 286 x 58 x 204
-
kr.34,900
Mono Power Amplifier – 1 x 600W @ 2 Ohms
S-A60MAlpine introduces the all-new S-Series amplifiers – a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
The S-Series amplifiers are available in mono, 4-channel and 5-channel configuration.
SPECIFICATIONS
Max Power Output Ratings- Total Max Power: 1100W
RMS Power Ratings
- Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 600W
- Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 330W
Sound Tuning
- Crossover: Variable LPF, 50-400Hz (-12dB/oct )
General
- Power Requirements: 14.4 V.DC (9 – 16 V allowable)
- Input Sensitivity (RCA Input): Hi: 0.5 – 10 V Lo: 0.2 – 4.0 V
- High Level Input with automatic power on
- Cable size: Power Cable AWG 4, SPK Cable AWG 8
- Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz
- THD+N (@ 10W into 4 ohms): <0.03%
- THD+N (@ 50W into 4 ohms): <0.08%
- Damping Factor: >1000
- Signal to Noise (@ 50 Watts into 4 Ohms): >105dB
- Weight: 1.9 kg
Dimensions
- Heat Sink (WxHxD) mm: 204 x 58 x 204
-
kr.10,900
1″ (2.5cm) S-Series Silk Dome Tweeter Set
S-S10TWThe S-S10TW Tweeter’s compact size and wide frequency range is an efficient and affordable upgrade to any factory or aftermarket sound system.
The tweeters measure at a mere 1” with a mounting depth of 17,6mm for easy installation in almost any vehicle. The tweeters can be flush mounted or installed with a high adjustable stealth OEM mount bracket (included), which allows them to be mounted on the top, bottom, or behind factory grill locations.
The Alpine logo is removable for stealth installation applications. Each soft dome comes enclosed in an adjustable swivel cup housing and directs the sound optimized for listener preference and vehicle imaging. For a perfect system matching experience, pair the S-S10TW with Alpine’s S-Series sound family.
SPECIFICATIONS
Power Handling
- Peak Power Capacity: 240W
- Max RMS Power Capacity: 80W
Dimensions
- Flush Mounting Depth: 17.6mm
- Cutout Diameter: 51mm
General
- Crossover: Passive 12dB/Octave High-Pass Filter
- Frequency Response: 1kHz-22kHz
- Sensitivity: 88dB (1W / 1m)
- Impedance: 6 Ohms
-
kr.13,200
4″ (10 cm) Coaxial 2-Way S-Series Speakers
The S-Series delivers amazingly high performance for this class of speaker. They boast the world’s first use of a CFRP diaphragm (Carbon Fiber Reinforced Plastic), which has the ideal balance of hardness and light-weight, for extremely clean and accurate sound. They also feature a larger voice coil than previous types for higher driving power, and the same HAMR surround as used on the X-Series.
Peak Power: 140 Watts
RMS Power: 45 Watts
Frequency Response: 97 Hz – 22 kHz
-
kr.15,900
5-1/4″ (13.5 cm) Coaxial 2-Way S-Series Speakers
S-S50The S-Series delivers amazingly high performance for this class of speaker. They boast the world’s first use of a CFRP diaphragm (Carbon Fiber Reinforced Plastic), which has the ideal balance of hardness and light-weight, for extremely clean and accurate sound. They also feature a larger voice coil than previous types for higher driving power, and the same HAMR surround as used on the X-Series.
Peak Power: 170 Watts
RMS Power: 55 Watts
Frequency Response: 80 Hz – 22 kHz
-
kr.19,900
6-1/2″ (16.5 cm) Coaxial 2-Way S-Series Speakers
S-S65The S-Series delivers amazingly high performance for this class of speaker. They boast the world’s first use of a CFRP diaphragm (Carbon Fiber Reinforced Plastic), which has the ideal balance of hardness and light-weight, for extremely clean and accurate sound. They also feature a larger voice coil than previous types for higher driving power, and the same HAMR surround as used on the X-Series.
Peak Power: 240 Watts
RMS Power: 80 Watts
Frequency Response: 70 Hz – 22 kHz
-
kr.28,900
6-1/2″ (16.5 cm) Component 2-Way S-Series Speakers
S-S65CThe S-Series delivers amazingly high performance for this class of speaker. They boast the world’s first use of a CFRP diaphragm (Carbon Fiber Reinforced Plastic), which has the ideal balance of hardness and light-weight, for extremely clean and accurate sound. They also feature a larger voice coil than previous types for higher driving power, and the same HAMR surround as used on the X-Series.
Peak Power: 240 Watts
RMS Power: 80 Watts
Frequency Response: 70 Hz – 22 kHz
-
kr.19,900
6 x 9″ (16 x 24 cm) Coaxial 2-Way S-Series Speakers
S-S69The S-Series delivers amazingly high performance for this class of speaker. They boast the world’s first use of a CFRP diaphragm (Carbon Fiber Reinforced Plastic), which has the ideal balance of hardness and light-weight, for extremely clean and accurate sound. They also feature a larger voice coil than previous types for higher driving power, and the same HAMR surround as used on the X-Series.
Peak Power: 260 Watts
RMS Power: 85 Watts
Frequency Response: 65 Hz – 22 kHz
-
kr.23,900
6 x 9″ (16 x 24 cm) Component 2-Way S-Series Speakers
S-S69CThe S-Series delivers amazingly high performance for this class of speaker. They boast the world’s first use of a CFRP diaphragm (Carbon Fiber Reinforced Plastic), which has the ideal balance of hardness and light-weight, for extremely clean and accurate sound. They also feature a larger voice coil than previous types for higher driving power, and the same HAMR surround as used on the X-Series.
Peak Power: 260 Watts
RMS Power: 85 Watts
Frequency Response: 65 Hz – 22 kHz
-
kr.20,900
10” (25cm) READY TO USE BASS REFLEX SUBWOOFER BOX (4Ω)
• 150W RMS
• 10” Type-E Subwoofer
• Frequency Response: 33Hz – 800Hz
• Stitched Alpine Logo
• High Quality Bass Reflex Box -
kr.22,900
12” (30cm) READY TO USE BASS REFLEX SUBWOOFER BOX (4Ω)
• 200W RMS
• 12” Type-E Subwoofer
• Frequency Response: 30Hz – 500Hz
• Stitched Alpine Logo
• High Quality Bass Reflex Box -
kr.28,900
Ready to use Bass Reflex Subwoofer
With 500W peak power handling, this ready-to-use bass reflex subwoofer box is just the thing for big bass fans. It has a pre-installed SWG-1044 subwoofer and is all wired with high quality terminals in the back. Acrylic windows on the top and side provide an inside view and the blue illumination adds a cool effect. A protective grille ensures that nothing sliding around in the trunk damages the woofer.
-
kr.28,900
Ready to use Band Pass Subwoofer (2Ohm)
SBG-1224BPWith 800W peak power handling, this ready-to-use band pass subwoofer box is just the thing for big bass fans. It has a pre-installed 12” Type-G Subwoofer and is all wired with high quality terminals on the side. Acrylic windows on the top and side provide an inside view and the blue illumination adds a cool effect. Its fully enclosed structure ensures that nothing sliding around in the trunk damages the woofer.
Features
- Type-G band pass Subwoofer Box
- 12” Type-G Subwoofer
- Acrylic window with blue illumination
- Peak Power: 800W
- RMS Power: 250W
- Dimensions: 473mm (W) x 380mm (H) x 314/414mm (D)
 |
