• kr.34,900

    The KTA-200M is a very compact mono amplifier, that is mainly designed to be power-stacked with the iLX-W650BT, but can also be used stand-alone in any universal configuration.

    Featuring Alpine’s Dynamic Peak Power (DPP) technology, the KTA-200M can produce 400 Watts of Alpine’s Exclusive Dynamic Peak Power for big subwoofer power in a small space.



  • The KTA-450 is a very compact 4/2-Channel amplifier, that is mainly designed to be power-stacked with the iLX-W650BT, but can also be used stand-alone in any universal configuration.

    Featuring Alpine’s Dynamic Peak Power (DPP) technology, the KTA-450 can add bursts of 100 Watts RMS power when needed.

    In combination with the iLX-W650BT, the KTA-450 won the 2019 Innovations Award at CES Show 2019. If you plan to buy an iLX-W650BT, this tiny amplifier will make a significant improvement to your system.


  • kr.109,900

    The PDP-E802DSP is the second generation of Alpine’s 8-Channel Digital DSP amplifier. This amazing all-in-one solution allows sound upgrading for virtually any vehicle with its incredible versatility and connectivity options. Featuring 6 input channels (both pre-amp and speaker level), as well as up to 8 fully configurable output channels allow for a very wide range of system applications and flexibility. Tune your sound with a professional 240-band Parametric EQ, 8 channel digital time correction, as well as a 8 channel digital crossover.

    For system setup, use the Alpine PC software to connect wirelessly or via USB to the PDP-E802DSP. The very intuitive and easy-to-use software allows for full control over all settings and displays all data in a very nice graphical user interface. The free-of-charge Alpine Remote Control for PDP-E802DSP app (available for both Android and iPhone) lets you control your DSP amp on the go and includes the most important functions, such as master-volume, subwoofer level, source selection, pre-set recall and more. The PDP-E802DSP is the perfect solution especially for OEM upgrades, where the factory radio can’t be replaced by an after-market solution to get better sound. The Alpine DSP amp simply adds-on to the existing OEM system, allowing you to build any sound system around your factory system.

    This versatile DSP amplifier features many improvement points for easier installability and improved sound quality. On the hardware side, the new designed input circuit improves noise suppression, while the new designed Pre-Out allows to connect an additional subwoofer amplifier if required. We improved the signal-to-noise ratio and included colour coded jumpers with clear labels to make installation and setup easier for the installer. There are many other improvements, such as better Wi-Fi stability, a more detailed RUX-KNOB2 adjustment behaviour, as well as an auto adjusting power supply voltage depending on load and volume. A new automatic impedance test protects your equipment from wrong connections.


  • kr.23,900

    4 Channel Amplifier

    Designed for Europe

    This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system.

    High Power, Great Value

    This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.

    High Pass and Low Pass Filters

    These two filters let you set the frequency points for the high, mid and bass ranges to match your speakers and ensure optimum efficiency.

    Bass EQ for Best Bass

    Performance With Bass EQ, you can maximise the performance of your system and get even more powerful bass.


  • kr.18,900

    2 Channel Amplifier

    BBX-T600

    Designed for Europe

    This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system.

    High Power, Great Value

    This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.

    High Pass and Low Pass Filters

    These two filters let you set the frequency points for the high, mid and bass ranges to match your speakers and ensure optimum efficiency.

    Bass EQ for Best Bass

    Performance With Bass EQ, you can maximise the performance of your system and get even more powerful bass.


  • kr.29,900

    HEAD UNIT POWER PACK

    Add On and Build Up Your System

    This compact upgrade instantly boosts the power of your system. Easy to install with no additional wiring, it fits neatly behind your head unit.

    • 4 x 100W MAX
    • 4 x 45W RMS
    • Works with all 2005 – present Alpine head units
    • Plug & Play installation (no additional wiring required)
    • Compact size

  • kr.19,900

    MONO POWER AMPLIFIER

    Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked our sounded better. Yes, it is possible to improve upon a good thing.

    Overview

    • Total Max Power: 550 W
    • 250W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)
    • 150W RMS x 1 (4Ω, 14.4V, ≤1% THD+N)
    • Evolution to Class D digital platform
    • New snap-on terminal covers for easy installation

  • kr.62,900

    R-Series 4-channel Power Amplifier – RMS Power Ratings 4 x 150W @ 2 Ohms – Total Max Power: 1200W

    R-A60F

    The “R” line of speakers and subwoofers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience.

    The new R-Series 4-channel amplifier produces massive power output – 1200W max to be precise and is Hi-Res Audio compliant. Use it with the R-Series speakers or subs (in bridged mode) for a loud and fun sound experience.

    R-Series amplifiers are available in mono and 4-channel configuration.

    SPECIFICATIONS

    Max Power Output Ratings

    • Total Max Power: 1200W

    RMS Power Ratings

    • Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 4 x 150W
    • Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 4 x 100W
    • Bridged, 4 Ohms, 14.4V: 2 x 300W

    Sound Tuning

    • Crossover: Variable HPF/LPF: 50-400Hz (-12dB/oct )
    • Crossover: Variable HPF-H: 400Hz-6kHz

    General

    • Power Requirements: 14.4 V.DC (9 – 16 V allowable)
    • Input Sensitivity (RCA Input): Hi: 0.5V – 10V / Low: 0.2V – 4.0V
    • High Level Input with automatic power on
    • Cable size: Power Cable AWG 4, SPK Cable AWG 8
    • Frequency Response (+0/ -3dB: 1W into 4 Ohms): 10Hz – 45kHz
    • THD+N (@ 10W into 4 Ohms): <0.03%
    • Damping Factor: >500
    • Weight: 3.2kg

    Dimensions

    • Heat Sink (WxHxD) mm: 273 x 50.8 x 200
    • With attached brackets: 273 x 50.8 x 223

  • kr.66,900

    R-Series Mono Power Amplifier – RMS Power Ratings 1 x 750W @ 2 Ohms – Total Max Power: 1500W

    The “R” line of speakers and subwoofers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience.

    The new R-Series mono amplifier produces massive power output – 1500W max to be precise. Use it with the R-Series subwoofers for a loud and fun bass experience.

    R-Series amplifiers are available in mono and 4-channel configuration.

    SPECIFICATIONS

    Max Power Output Ratings

    • Total Max Power: 1500W

    RMS Power Ratings

    • Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 750W
    • Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 500W

    Sound Tuning

    • Crossover: Variable LPF: 50-400Hz (-24dB/oct )
    • Variable Subsonic: 8Hz – 40Hz (-24dB/oct.)

    General

    • Power Requirements: 14.4 V.DC (9 – 16 V allowable)
    • Input Sensitivity (RCA Input): Hi: 0.4V – 10V / Low: 0.1V – 4.0V
    • High Level Input with automatic power on
    • Cable size: Power Cable AWG 4, SPK Cable AWG 8
    • Frequency Response (+0/ -3dB: 1W into 4 Ohms): 10Hz – 400Hz
    • THD+N (@ 10W into 4 Ohms): <0.02%
    • THD+N rated power into 4 Ohms): <0.03%
    • Damping Factor: >1500
    • Signal to Noise (rated power into 4 Ohms): >105dB
    • Weight: 3.2kg

    Dimensions

    • Heat Sink (WxHxD) mm: 273 x 50.8 x 200
    • With attached brackets: 273 x 50.8 x 223

  • kr.34,900

    4-Channel Power Amplifier – 4 x 80W @ 2 Ohms

    Alpine introduces the all-new S-Series amplifiers – a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance and won’t shut down due to overheating. They also feature excellent sound quality in their price range.

    The S-Series amplifiers are available in mono, 4-channel and 5-channel configuration.

    SPECIFICATIONS
    Max Power Output Ratings

    • Total Max Power: 640W

    RMS Power Ratings

    • Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 4 x 80W
    • Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 4 x 55W
    • Bridged into 4 Ohms, 14.4V (≤1%THD+N): 2 x 160W

    Sound Tuning

    • Crossover: Variable LPF, 50-400Hz (-12dB/oct )
    • Crossover: Variable HPF, 50-400Hz (-12dB/oct )

    General

    • Power Requirements: 14.4 V.DC (9 – 16 V allowable)
    • Input Sensitivity (RCA Input): Hi: 0.5 – 10 V Lo: 0.2 – 4.0 V
    • High Level Input with automatic power on
    • Cable size: Power Cable AWG 8, SPK Cable AWG 10
    • Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 10Hz – 30kHz
    • THD+N (@ 10W into 4 ohms): <0.03%
    • THD+N (@ 50W into 4 ohms): <0.08%
    • Damping Factor: >100
    • Signal to Noise (@ 50 Watts into 4 Ohms): >98dB
    • Weight: 1.9 kg

    Dimensions

    • Heat Sink (WxHxD) mm: 204 x 58 x 204

  • kr.55,900

    5-Channel Power Amplifier – 4 x 60W + 1 x 300W @ 2 Ohms

    Alpine introduces the all-new S-Series amplifiers – a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance and won’t shut down due to overheating. They also feature excellent sound quality in their price range.

    The S-Series amplifiers are available in mono, 4-channel and 5-channel configuration.

    SPECIFICATIONS
    Max Power Output Ratings

    • Total Max Power: 1100W

    RMS Power Ratings

    • Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 4 x 60W + 1 x 300W
    • Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 4 x 40W + 1 x 200W
    • Bridged into 4 Ohms, 14.4V (≤1%THD+N): 2 x 120W

    Sound Tuning

    • Crossover: Variable LPF, 50-400Hz (-12dB/oct )
    • Crossover: Variable HPF, 50-400Hz (-12dB/oct )

    General

    • Power Requirements: 14.4 V.DC (9 – 16 V allowable)
    • Input Sensitivity (RCA Input): Hi: 0.5 – 10 V Lo: 0.2 – 4.0 V
    • High Level Input with automatic power on
    • Cable size: Power Cable AWG 4, SPK Cable AWG 12
    • Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 10Hz – 30kHz
    • Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-5: 10Hz – 400Hz
    • THD+N (@ 10W into 4 ohms): <0.03%
    • THD+N (@ 50W into 4 ohms): <0.07%
    • Damping Factor: Channel 1/2/3/4: >100, Channel 5: >750
    • Signal to Noise (@ 50 Watts into 4 Ohms): >98dB
    • Weight: 2.9 kg

    Dimensions

    • Heat Sink (WxHxD) mm: 286 x 58 x 204

  • kr.34,900

    Mono Power Amplifier – 1 x 600W @ 2 Ohms

    S-A60M

    Alpine introduces the all-new S-Series amplifiers – a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance and won’t shut down due to overheating. They also feature excellent sound quality in their price range.

    The S-Series amplifiers are available in mono, 4-channel and 5-channel configuration.

    SPECIFICATIONS
    Max Power Output Ratings

    • Total Max Power: 1100W

    RMS Power Ratings

    • Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 600W
    • Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 330W

    Sound Tuning

    • Crossover: Variable LPF, 50-400Hz (-12dB/oct )

    General

    • Power Requirements: 14.4 V.DC (9 – 16 V allowable)
    • Input Sensitivity (RCA Input): Hi: 0.5 – 10 V Lo: 0.2 – 4.0 V
    • High Level Input with automatic power on
    • Cable size: Power Cable AWG 4, SPK Cable AWG 8
    • Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz
    • THD+N (@ 10W into 4 ohms): <0.03%
    • THD+N (@ 50W into 4 ohms): <0.08%
    • Damping Factor: >1000
    • Signal to Noise (@ 50 Watts into 4 Ohms): >105dB
    • Weight: 1.9 kg

    Dimensions

    • Heat Sink (WxHxD) mm: 204 x 58 x 204

  • kr.83,900

    4-channel Power Amplifier – X-A70F

    Alpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction and a spatial sound impression.

    The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four channel and five channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.


  • kr.83,900

    Mono Power Density Digital Amplifier – X-A90M

    Alpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction and a spatial sound impression.

    The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four channel and five channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.


  • kr.90,900

    4-channel + Mono Power Amplifier – X-A90V

    Alpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction and a spatial sound impression.

    The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four channel and five channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.

Navigation

My Cart

Close
Viewed

Recently Viewed

Close

Quickview

Close

Categories