581 1118
Nánar upplýsingar á vefnum framleiðlanda Skoða nánar
MRV-M250
kr.19,900
MONO POWER AMPLIFIER
Tens of thousands have relied on V-Power amplifiers for dependable, quality power. Now in their fourth generation, V-Power amplifiers carry on this heritage and prove that playing strong never looked our sounded better. Yes, it is possible to improve upon a good thing.
Overview
- Total Max Power: 550 W
- 250W RMS x 1 (2Ω, 14.4V, ≤1% THD+N)
- 150W RMS x 1 (4Ω, 14.4V, ≤1% THD+N)
- Evolution to Class D digital platform
- New snap-on terminal covers for easy installation
kr.34,900
4-Channel Power Amplifier – 4 x 80W @ 2 Ohms
Alpine introduces the all-new S-Series amplifiers – a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
The S-Series amplifiers are available in mono, 4-channel and 5-channel configuration.
SPECIFICATIONS
Max Power Output Ratings
- Total Max Power: 640W
RMS Power Ratings
- Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 4 x 80W
- Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 4 x 55W
- Bridged into 4 Ohms, 14.4V (≤1%THD+N): 2 x 160W
Sound Tuning
- Crossover: Variable LPF, 50-400Hz (-12dB/oct )
- Crossover: Variable HPF, 50-400Hz (-12dB/oct )
General
- Power Requirements: 14.4 V.DC (9 – 16 V allowable)
- Input Sensitivity (RCA Input): Hi: 0.5 – 10 V Lo: 0.2 – 4.0 V
- High Level Input with automatic power on
- Cable size: Power Cable AWG 8, SPK Cable AWG 10
- Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 10Hz – 30kHz
- THD+N (@ 10W into 4 ohms): <0.03%
- THD+N (@ 50W into 4 ohms): <0.08%
- Damping Factor: >100
- Signal to Noise (@ 50 Watts into 4 Ohms): >98dB
- Weight: 1.9 kg
Dimensions
- Heat Sink (WxHxD) mm: 204 x 58 x 204
kr.55,900
5-Channel Power Amplifier – 4 x 60W + 1 x 300W @ 2 Ohms
Alpine introduces the all-new S-Series amplifiers – a perfect match to the S-Series speakers. These amps have an excellent Watts-per-Euro ratio in the Class-D category, feature a very high heat resistance and won’t shut down due to overheating. They also feature excellent sound quality in their price range.
The S-Series amplifiers are available in mono, 4-channel and 5-channel configuration.
SPECIFICATIONS
Max Power Output Ratings
- Total Max Power: 1100W
RMS Power Ratings
- Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 4 x 60W + 1 x 300W
- Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 4 x 40W + 1 x 200W
- Bridged into 4 Ohms, 14.4V (≤1%THD+N): 2 x 120W
Sound Tuning
- Crossover: Variable LPF, 50-400Hz (-12dB/oct )
- Crossover: Variable HPF, 50-400Hz (-12dB/oct )
General
- Power Requirements: 14.4 V.DC (9 – 16 V allowable)
- Input Sensitivity (RCA Input): Hi: 0.5 – 10 V Lo: 0.2 – 4.0 V
- High Level Input with automatic power on
- Cable size: Power Cable AWG 4, SPK Cable AWG 12
- Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-1/2/3/4: 10Hz – 30kHz
- Frequency Response (+0, -3dB: 1W into 4 ohms) for CH-5: 10Hz – 400Hz
- THD+N (@ 10W into 4 ohms): <0.03%
- THD+N (@ 50W into 4 ohms): <0.07%
- Damping Factor: Channel 1/2/3/4: >100, Channel 5: >750
- Signal to Noise (@ 50 Watts into 4 Ohms): >98dB
- Weight: 2.9 kg
Dimensions
- Heat Sink (WxHxD) mm: 286 x 58 x 204
kr.62,900
R-Series 4-channel Power Amplifier – RMS Power Ratings 4 x 150W @ 2 Ohms – Total Max Power: 1200W
R-A60F
The “R” line of speakers and subwoofers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience.
The new R-Series 4-channel amplifier produces massive power output – 1200W max to be precise and is Hi-Res Audio compliant. Use it with the R-Series speakers or subs (in bridged mode) for a loud and fun sound experience.
R-Series amplifiers are available in mono and 4-channel configuration.
SPECIFICATIONS
Max Power Output Ratings
- Total Max Power: 1200W
RMS Power Ratings
- Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 4 x 150W
- Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 4 x 100W
- Bridged, 4 Ohms, 14.4V: 2 x 300W
Sound Tuning
- Crossover: Variable HPF/LPF: 50-400Hz (-12dB/oct )
- Crossover: Variable HPF-H: 400Hz-6kHz
General
- Power Requirements: 14.4 V.DC (9 – 16 V allowable)
- Input Sensitivity (RCA Input): Hi: 0.5V – 10V / Low: 0.2V – 4.0V
- High Level Input with automatic power on
- Cable size: Power Cable AWG 4, SPK Cable AWG 8
- Frequency Response (+0/ -3dB: 1W into 4 Ohms): 10Hz – 45kHz
- THD+N (@ 10W into 4 Ohms): <0.03%
- Damping Factor: >500
- Weight: 3.2kg
Dimensions
- Heat Sink (WxHxD) mm: 273 x 50.8 x 200
- With attached brackets: 273 x 50.8 x 223
kr.19,900
12″ (30cm) Subwoofer (4Ohm)
Excellent bass performance plus high power handling and efficiency at a surprisingly affordable price.
kr.18,900
10″ (25cm) Subwoofer (4Ohm)
Excellent bass performance plus high power handling and efficiency at a surprisingly affordable price.
kr.17,900
6 x 9″ (16 cm x 24 cm) COAXIAL 3-WAY SPEAKER
Built to Handle High Power The new Type-G Series of component and coaxial speakers are designed and built to handle high power levels. This speaker also delivers good sound quality, due to a soft dome tweeter, square voice coil wire with Kapton bobbin and an audio tuned capacitor.
kr.9,900
Alpine Custom 5×7 hátalarar
SXE-5725S
5 x 7 tommur
200W Peak (35W RMS)
Tíðni: 70Hz – 20kHz
kr.109,900
The PDP-E802DSP is the second generation of Alpine’s 8-Channel Digital DSP amplifier. This amazing all-in-one solution allows sound upgrading for virtually any vehicle with its incredible versatility and connectivity options. Featuring 6 input channels (both pre-amp and speaker level), as well as up to 8 fully configurable output channels allow for a very wide range of system applications and flexibility. Tune your sound with a professional 240-band Parametric EQ, 8 channel digital time correction, as well as a 8 channel digital crossover.
For system setup, use the Alpine PC software to connect wirelessly or via USB to the PDP-E802DSP. The very intuitive and easy-to-use software allows for full control over all settings and displays all data in a very nice graphical user interface. The free-of-charge Alpine Remote Control for PDP-E802DSP app (available for both Android and iPhone) lets you control your DSP amp on the go and includes the most important functions, such as master-volume, subwoofer level, source selection, pre-set recall and more. The PDP-E802DSP is the perfect solution especially for OEM upgrades, where the factory radio can’t be replaced by an after-market solution to get better sound. The Alpine DSP amp simply adds-on to the existing OEM system, allowing you to build any sound system around your factory system.
This versatile DSP amplifier features many improvement points for easier installability and improved sound quality. On the hardware side, the new designed input circuit improves noise suppression, while the new designed Pre-Out allows to connect an additional subwoofer amplifier if required. We improved the signal-to-noise ratio and included colour coded jumpers with clear labels to make installation and setup easier for the installer. There are many other improvements, such as better Wi-Fi stability, a more detailed RUX-KNOB2 adjustment behaviour, as well as an auto adjusting power supply voltage depending on load and volume. A new automatic impedance test protects your equipment from wrong connections.
kr.19,900
12“ (30cm) Bass Reflex Subwoofer Tube (4Ohm)
With 1000W peak power handling, this ready-to-use bass reflex subwoofer tube is just the thing for big bass fans. A protective grille ensures that nothing sliding around in the trunk damages the woofer.
kr.66,900
R-Series Mono Power Amplifier – RMS Power Ratings 1 x 750W @ 2 Ohms – Total Max Power: 1500W
The “R” line of speakers and subwoofers have a heritage of sound quality you can hear from a block away, and the newly added R-Series amplifiers are no exception. Aside from their best-in-class performance, these amplifiers are tuned to emphasize the characteristics of the R-Series speakers and subwoofers, giving you that legendary R-Series experience.
The new R-Series mono amplifier produces massive power output – 1500W max to be precise. Use it with the R-Series subwoofers for a loud and fun bass experience.
R-Series amplifiers are available in mono and 4-channel configuration.
SPECIFICATIONS
Max Power Output Ratings
- Total Max Power: 1500W
RMS Power Ratings
- Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 750W
- Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 500W
Sound Tuning
- Crossover: Variable LPF: 50-400Hz (-24dB/oct )
- Variable Subsonic: 8Hz – 40Hz (-24dB/oct.)
General
- Power Requirements: 14.4 V.DC (9 – 16 V allowable)
- Input Sensitivity (RCA Input): Hi: 0.4V – 10V / Low: 0.1V – 4.0V
- High Level Input with automatic power on
- Cable size: Power Cable AWG 4, SPK Cable AWG 8
- Frequency Response (+0/ -3dB: 1W into 4 Ohms): 10Hz – 400Hz
- THD+N (@ 10W into 4 Ohms): <0.02%
- THD+N rated power into 4 Ohms): <0.03%
- Damping Factor: >1500
- Signal to Noise (rated power into 4 Ohms): >105dB
- Weight: 3.2kg
Dimensions
- Heat Sink (WxHxD) mm: 273 x 50.8 x 200
- With attached brackets: 273 x 50.8 x 223
kr.11,900
4″ (10cm) COAXIAL 2-WAY SPEAKER
Built to Handle High Power The new Type-G Series of component and coaxial speakers are designed and built to handle high power levels. This speaker also delivers good sound quality, due to a soft dome tweeter, square voice coil wire with Kapton bobbin and an audio tuned capacitor.
kr.29,900
HEAD UNIT POWER PACK
Add On and Build Up Your System
This compact upgrade instantly boosts the power of your system. Easy to install with no additional wiring, it fits neatly behind your head unit.
- 4 x 100W MAX
- 4 x 45W RMS
- Works with all 2005 – present Alpine head units
- Plug & Play installation (no additional wiring required)
- Compact size